MY CURRENT E-QSL CARD
MY HAM TRANSCEIVERS
YAESU FT-897D
►
operating
manual
►
modification sheet
►
flickering
squelch fix
►
technical supplement
Alinco DJ-596 MKII
►
instruction
manual ►
service manual
|
|
Frequency range: | TX: 144-145.995MHz |
| RX: 430-439.995MHz | ||
| Operating mode: | F2(1200bps)/8K50F3E/16k0F3E/F1E(Op: digital) | |
| Channel steps: | 5, 10, 12.5, 15, 20, 25, 30KHz | |
| Memory channel: | 100 channels + 2 quick recall (CALL) | |
| Impedance: | BNC (50ohm unbalanced) | |
| Voltage: | 6.0 - 15.0V DC negative ground | |
| Dimensions (w/o projection) | 56mm(W) x 124mm(H) x 36.5mm(D) | |
| CTCSS tone | encoder/decoder 39 tones | |
| Digital Coded Squelch | encoder/decoder 104 codes |
Kenwood TH-28E
► manual
|
|
Frequency range: | 144-146 MHz |
| Mode: | FM | |
| RF Power output: | Hi: 2.5-5 W (depending on voltage) Lo: 0.5 W El: 20 mW |
|
| Voltage: | 7.2-16 VDC | |
| Impedance: | 50 ohms, BNC | |
| Dimensions (W*H*D): | 49.5*115.8*37.8 mm | |
| Weight: | 330 gr (with PB-13, antenna, handstrap and belt hook) | |
| Other: | RX: 118-174 / 430-440 MHz |
MY HAM equipment
MFJ-904 Deluxe Travel Tuner
|
|
The MFJ-904 Travel Tuner handles up to 150 watts and covers 80 to 10 meters. It is the same as the MFJ-902, but includes a cross-needle SWR/Wattmeter that shows SWR, forward, and reflected power all at a glance. Push button selects forward/reflected power in 300/60 and 30/6 Watt ranges. |
Ham Radio Controller 2
► manufacturer
►
schema
|
|
||
MY HAM ANTENNE
MULTIBAND TRAP VERTICAL DIAMOND CP-6
|
|
The CP6 is a multi-band
trap-vertical antenna for HF bands, covering the 80, 40, 20, 15, 10 &
6m amateur bands. Made from heavy-duty aluminum, the CP6 is easily
assembled, yielding excellent performance and reliability from a compact
base station. Specifications
|
BEAM ASAY 10-15-20-40M, 3 ELEMENT TRAP - CONIC TUBES
|
|
Specifications
|
G5RV all band HF antenna
|
|
Covers all bands, 160-10 Meters with antenna tuner. 102 feet long, shorter than 80 Meter dipole. Use as inverted vee or sloper to be more compact. Use on 160 Meters as Marconi with tuner and ground. Handles full legal limit power. Add coax feedline -- get on the air! |
MY BCL RECEIVERS
EKD-511
►
technical data
►
schematics
► operating (germany)
► service manual: table of contents
► service manual: sections 1 to 5
► service manual: section 6
► service manual: section 7
|
|
RX Coverage: | 14 kHz - 30 MHz |
| Filter 1.ZF | 3 dB +/- 5 kHz, SSB | |
| ZF-Filter | +/- 0,25 - 3 kHz | |
| Modes: | AM, USB, LSB, CW, FAX, ISB |
Sangean ATS-803A
|
|
RX Coverage: | FM 87,7-108 MHz (stereo) MW 520-1710 kHz LW 150-519 kHz SW 0,15-30 MHz |
| Modes: | AM/SSB | |
| Circuit: | Double Conversion | |
| Features: | Mini Head. Jack, S/Battery Indicator, Tone, Keypad, Clock-Timer, 9 Memories, External Antenna Jack, Sleep, RF Gain, Lock, Handle, Wide-Narrow Selectivity, Record Output, Dial Lamp, Manual Tuning, Up-Dn Tuning, BFO. | |
MY SWL/BCL ANTENNAS
MFJ-1020C - SWL Active Indoor Antenna
►
manual
|
|
Frequency Coverage: | 300 kHz to 40 MHz |
| Gain Control: | -10 dB to +10dB | |
| Band Switch: | 6 Position (5 bands and OFF) | |
| Input: | SO-239 | |
| Output | SO-239 | |
| Voltage In: | 9-12 VDC at 45 mM (3.5 mm coxial jack) |
MINIWHIP - SWL Active Indoor Antenna
►
manual
| Frequency Coverage: | 10 kHz – 30 MHz |
| Second order output intercept point: | > + 70 dBm |
| Third order output intercept point: | > + 30 dBm |
| Maximum output power: | in excess of – 15 dBm |
| Voltage In: | 12 – 15 volts at 50 mA. |
| Length: | 100 mm, diameter: 40 mm |
